Posts

Showing posts with the label shelter

Shelter is completed

Image
My work is done on "Shelter." (For the origin of this quilt, click here ; for all related posts, click on "shelter" in the list of labels on the lower right side of the blog page. Double-click on the above and other photos for a clearer, enlarged photo.) "How do I feel, now that it's completed?" two good friends have asked. One of these friends, Mary Beth Clark, did a series of quilts about the loss of her mother, who had died more than 40 years previously, when Mary Beth was eight years old. (For one of those quilts, "The Last Squeeze," click here and scroll down to Episode 39.) "Does is make it any easier, having done these quilts?" I asked her several years ago, wanting to hear "yes" as an answer. "No," she said. So, how do I feel? I feel a sense of satisfaction that the piece is done. It is the most challenging piece I have done in terms of design decisions and construction techniques. The impor...

Quilting Shelter

Image
I've been working on quilting "Shelter" for about a week now. (Click on the image for a closer-up view.) I want to highlight the complexity of the piecing/applique as it is, rather than add more complexity through the stitching, so I am quilting entirely with in-the-ditch quilting. For the non-quilters reading my blog, this means very careful stitching directly in the seam line. If done precisely, the stitching is almost invisible, as it sinks into the "ditch" of the seam. It's a kind of quilting easier done by hand than by machine, but hand-quilting is not an option for me right now because of the pain and numbness I've had in my hand. (I've gotten a good deal of relief from several weeks of occupational therapy, but I still need to be careful.) So, I'm doing the quilting by machine, which means very slow, careful following of lines. It needs every ounce of my attention--I found that I couldn't even have quiet piano music on at the ...

Sample of machine quilting

Image
I've finished all the remaining applique on the four tiers of "Shelter." Even though I tried to pace myself, doing all this applique was stressful on my wrist, and I've developed a ganglion cyst . So, I need to find a way to machine quilt this piece rather than hand-quilting, which would be even more stressful on my wrist than applique. On the small sample piece above, I've quilted every other strip with "in the ditch" quilting (which runs right up against the seam-line). I think this is good--maybe even better in final appearance than hand-quilting. You can't see it unless you look extremely closely, and it will give a more flat texture than hand-quilting would. I did a row of top-stitching also, just to see how it would look. If you click on the photo above to enlarge, you can see it on the middle strip in the turquoise tier. Top-stitching is easier to do than ditch-stitching, but it would add another visible line, which I don't want he...

Back to Shelter

Image
I put in a lot of work on "Shelter" in the winter and spring, to get to the point where I could roughly join the four tiers and show the quilt as part of the talk I gave in late April on "From Study to Studio: Meaning and Motivation in Scholarship and Art." (Here's a post where you can see what it looked like then, and where I explain problems that remained.) After the talk, I needed a break from the quilt. I also knew that I would be getting together in early June with quilting friends from the Chicago area, and that they could help me think through the problems. And they did! With their help I made a decision about what to do with the bottom right corner, and they also pointed out a couple of areas in the piecing that could use some adjusting. Having spent some time clearing out the studio, and doing the easy-piecing of the four-patch posie quilt, I finally felt ready last week to put "Shelter" back up on the design wall. I pieced some addition...

Shelter basted up

Image
The pressure was on to get the four tiers of "Shelter" put together in time for the talk I gave on Friday, "Study to Studio: Meaning and Motivation in Scholarship and Art." Here they are, roughly basted and pinned together, and the 4 edges also just basted under. (This is the top only.) Things that still need thinking about: the exact curves of the big joins--this is the easiest thing to fix up; the grey fabric worked into the black--this may need to go, also not hard to fix; the bottom right corner--big design flaw. Why did I make the black tier span both bottom and right edges? I think I did it to lessen reference to a kind of rainbow. But I did the final drawing in pencil only, on white paper. I didn't do a small final maquette with fabrics based on that drawing. Sigh. This will be more difficult to fix. I could do a quick fix by folding in the right side about 8 inches: But this results in a vertical composition, not what I had in mind, and the sha...

Shelter, a class, some writing, a workshop

Image
While I work on constructing the black tier of shelter, I'm also doing some hand-sewing on the other tiers, doing final stitching and taking out basting. I've enjoyed looking at these pieces up close again as I sew. And here's the black in progress. It's coming along quite well. Progress is a little slowed by the start of a new term of teaching, with some other things on my plate as well. I'm taking a drawing class at the college, one that focuses on the legacy of minimalist, abstract drawing (like Eva Hesse, Agnes Martin, Sol Lewitt) rather than representational, figural drawing. I love these artists, and I think this kind of drawing will help my development in quilting. We'll see. I'm also working on a presentation I'll be giving at the college in late April, "From Study to Studio," describing/explaining my turn from scholarship to art. I've talked about this to an audience of quilters before, but not to my colleagues at the college...

A compromise solution

Image
Three commenters on the last post told me that the value range in the turquoise looked fine to them--very helpful to have this feedback, which leads me to a compromise plan. I've pinned turquoise strips up over some of the darker teal/green strips, but not over all of them. This looks like the right direction to me. A big relief. This gives me the energy to finish up the piecing and sewing of the black tier, and then I'll go back to re-work the turquoise a bit.

A new problem with Shelter

Image
I've strip-pieced most of the black strata needed, and stuck them up on the design wall, pinning the other tiers in place so I could get a glimpse of the whole. The little tags on the turquoise are marking spots I was planning on altering. But now I see a larger problem. The turquoise tier has a much wider range of value than any of the others, and I don't think that works. I think I'll need to revise more deeply, taking out/covering up the dark teals. Of course I could go the other direction--add more value range in the other tiers. But I think a smaller range is more in keeping with my vision of the piece--and adding a wider range for black isn't possible in any case. I want to feel closer to the finish line with this piece. . . Instead of getting easier as I go, the challenges keep adding up. I have to keep the mantra of "persistence" in mind.

Time for Black

Image
I've finished piecing and basting the orange-red tier of "Shelter" (photo at end of post), and am now moving on to the final tier of black. Each tier has posed new challenges--up to this point all issues of construction and piecing. For the black tier, the challenge is in color/value. The blue, turquoise, and orange-red tiers have used variation in value (and to some extent in color) for contrast within the piecing. But lighter values of black would bring in gray, and I don't think that belongs. So I'm going to try variations in texture, variations in color (blue/black, brown/black), and a very little bit of variation in value to dark gray. The very dark black in the photo above is velvet, which I got for texture, but it also does value. In the photo below, you can see a bit of the brownish and bluish batiks as well; for some reason everything except the thin bit of velvet looks gray here, but they are black in real life. And here's a shot of the orange...

Trial and error

Image
I'm not 100% satisfied with how I've done the finish of the strata that end mid-tier. In the turquoise section, I used a "blunt" finish, slightly curved, which you can see in the left third of the turquoise section above. I've tried something else in the orange-red tier. One finish, about a third of the way in from the left, is slightly "stepped" rather than curved; hard to see in the photo above, a bit more visible below. A second is done with a series of points, readily seen below, towards the right edge of the photo. I was excited to try these other methods, but, in the end, I think I like the blunt end better.

Shelter--a preview of the whole

Image
Blue and turquoise tiers are pieced and basted. Strata for orange/red are pieced and pinned on the design wall--more manipulation of the pieces to be done to break up the lines. Black is just one piece of fabric put up for the color--piecing of many blacks into strata still to be done. The black tier will be larger than it appears here and the orange/red smaller. Size = about 60" wide.

Turquoise scraps

Image
This is a 4" coaster, made with scraps from the turquoise tier of "Shelter," along with some of the orange-red that will go in another tier. Tomorrow I'm going to start strip-piecing the orange-red fabrics.

Alternating easy and difficult

Image
Writing my last post about ten days ago was very helpful to me. The realization that I didn't have to think about April as a deadline for finishing Shelter gave me permission to enjoy simpler piecing projects without feeling they were a distraction from the larger work. I started up a routine that has been very productive as well as satisfying. I would "warm up" by laying out and piecing together a few blocks of the "Spectrum" quilt, and then I would move over to Shelter. To help me focus on the more difficult work, but not get overwhelmed or discouraged, I decided to limit a stint on Shelter to the length of a CD--about 40 minutes. (I generally listen to instrumental only for work that takes mental concentration--quiet jazz or solo guitar.) Alternating back and forth (though generally not doing more than one or two stretches on Shelter in any one day) has had significant results. The finished Spectrum quilt above, quilted and washed. This is 36x36. ...

back to Shelter

Image
Finally, a good stretch of time last weekend and the mental state needed to get back to work on Shelter. The photo above is one section of the turquoise tier, just basted for now, but I'm liking it. The problem comes as I move across into bigger areas. There is going to be some "stubbiness." I think the piece about in the middle above that ends in a stub is OK, but that the piece that starts with a stub, below the top edge of the tier (like the light green piece) is not. This section further is pinned only, not basted, so no problem making changes. I might try changing the angle of the stub, but it will probably be better to have everything either start from the top edge, or be tucked under another piece. If you are able to follow this somewhat convoluted description and have any suggestions, I'd be glad to know them! Another challenge is that this tier is so much larger than the dark blue tier that I can't use the same construction process. For the small...

Slow progress on Shelter

Image
I've been very busy with a large project at work for the last two months, which has made it difficult to get back to "Shelter." I am at the stage of building up the large turquoise section that will arc around the blue section. I started working with some strata that I had pieced back in February, but found that working with 42" strips on this larger section wasn't going to work--the pieces looked "straight" even with curved piecing. I finally figured out that I needed to work with shorter pieces and interlace them, as I'd done in a very early sample piece . So, I cut most of the existing strata and most of my fabric in half (scary! I left some uncut, just in case). I laid the strips out on a drying rack (photo above), and now in the shorter bits of time I have for quilting (given the big work project), I'm concentrating on creating more strata, rather than working on laying them out on the design wall--which takes more active mental wor...

Details

Image
Having finished the blue section of "Shelter," I'm taking a break, and have made a half-dozen coasters, 4x4," piecing leftovers from the strip-pieced strata, and adding in an accent color. These make up quickly, especially if I sew just one line of stitching around the edge, rather than quilting lines inside the square. I didn't think to take a photo of version #1, where I had sewn a continuous row of navy blue stitching around the edge of the coaster. The blue stitching across the red/orange stripe was distracting. "But it's just a coaster," I told myself. But I also kept noticing the blue stitches interrupting the contrasting stripe. So, the next coasters I sewed a start-and-stop line, thinking I would leave the earlier ones as they were. In the end, I ripped out the stitches in the earlier ones, and re-did them. Better. At a retreat this winter, Bill Kerr of FunQuilts gave a talk about the importance of details--to carry out one...

Bricolage

Image
I've spent this week going from pinned up sections of strip-pieced strata to sewing together the sections with needle-turn appliqué. As I have tried this and that in the somewhat complex process of construction of this piece, the term "bricolage" came to my mind. It's a term I learned long ago when reading Claude Levi-Strauss's book, The Savage Mind; it refers to the making of something through a kind of resourceful tinkering or fiddling around, making use of things that are at hand. When making a quilt that originates in an idea, rather than a pattern, it can be a puzzle as to how to physically get the fabric to do what one has imagined. Sometimes I feel like an engineer, figuring out a process of construction. But "bricoleur" (one who does bricolage) is closer to the role, as it is not a systematic, principled process, but one of trial and experimentation. Next spring I'm scheduled to do a talk at the college where I teach, in a series dedica...

When is something done?

Image
One week later, I think this is now ready to be sewn. (Click on image to enlarge.) After the version posted on 5/30, I fiddled for another hour or so, and then wrote to a friend, "Knowing there are limitless variations, it's sometimes hard to know when to stop. Sometimes I know 'This is IT,' but sometimes the feeling is more like 'yes, I could go on, but this version is good, so get on with it.' Right now, I feel more like the latter. I'll look at it again tomorrow and see what I think." Well, when I looked at it the next day, I knew it wasn't there yet. Every day this week I've spent time adding and changing pieces. As soon as one section was better, something would bother me in another section. When is it done? When I can sit peacefully in front of the work, with no one spot catching my eye, calling out to me for further attention. As I've turned from writing and scholarship to quilting, I've often seen parallels in the two...

First section of "Shelter"

Image
For the last couple of weeks, I've been back working on "Shelter," constructing the bottom left corner. (Click here for a sketch of the quilt and notes on how the layers are being constructed.) The photo shows a lot of strata pinned in place (28"high and 34" wide). The challenges I'm finding are: 1) working in variations in line, avoiding too many parallel lines; 2) judging the right quantity and placement of light-valued pieces ( the largish shiny stripe in the upper right is not so bad in reality--it's satin that is catching the flash) ; 3) avoiding some pieces that sweep across the whole field. I thought I had fixed this last issue, but in adjusting something else, there it is again. A detail: Suggestions welcome!

Progress on "Shelter"

Image
After a couple of years of making countless small sketches and maquettes with different combinations of curves for my "Shelter" quilt, I made the leap recently to a full-sized pattern. It has turned out to be larger than I had been thinking of—this is 58x70 (instead of about 34x40)—David's suggestion and a good idea. The width was determined by how far my hand could sweep a line without me taking a step. (For other views of the plan for the quilt, go to this earlier post .) I've been making progress with doing sets of curved strip-piecing with the fabric I've collected in turquoise, cobalt, rusty red, and black. The next photo shows which color I'm thinking of for which part of the quilt. There will be many panels joined up in each swatch of color, with a variety of angles. Reading Vikki Pignatelli's Quilting by Improvisation has given me very helpful ideas for how I'll stitch them together—basically, an improvised appliqué technique. Here you can ...